You are here:
>Design Options
>Raised Borders
>Design Borders - Flat Relief
>Edges
>Background Colours
>Colour Chart >Inscriptions
>Colour Chart >Inscriptions
Edges
This range of elegantly designed borders has been generated using a technical process that will
enable them to be included on any size marker.
The Rock and Wood Borders provide a sculptured look to the edge of your plaque. The width of these borders will vary with the size of marker required. Standard widths for these borders will be 1" for markers 24" x 12" and less and 1.5" for plaques over 24" x 12".
The Rock and Wood Borders provide a sculptured look to the edge of your plaque. The width of these borders will vary with the size of marker required. Standard widths for these borders will be 1" for markers 24" x 12" and less and 1.5" for plaques over 24" x 12".
Rock
Wood
Other options include Plain Cut (Straight) Edges and Bevel Edges. Bevel Edges on plaques can
be either painted or polished. This range is available on all sized plaques and bevel widths will
be set to match existing ranges.
Plain Cut (Straight) Edge
Bevel Edge (available with painted or polished finish)
Design Borders can be placed inside any of these edges as shown on the Bevel Edge above.
